Prijava

Navodila za namestitev eSIM

Namestite v 3 minutah, samodejna aktivacija ob prihodu

One-tap install with the Yoho app

Download the Yoho Mobile app and sign in with this account — your eSIM appears ready to install, no QR scanning or copy-pasting.

Download on theApp StoreGet it onGoogle Play

Or install it manually below

Step 1

Before you install

A few seconds of prep saves frustration.

Stay on Wi-Fi

Install with a stable connection so the profile downloads cleanly.

Don't interrupt

Activation can take a minute. Don't close the screen mid-install.

Give it a label

A unique name helps you spot this eSIM among other SIMs.

Choose for data

After install, set this eSIM as the line your phone uses for data.

Step 2

Install your eSIM

Pick QR or Manual — you only need one.

Your eSIM QR code lives in your account

When you place an order, your scannable QR code and activation details are added to your eSIM detail page. Use that page during install — not this generic guide.

View my eSIMShop plans

  1. Open Settings → Cellular → Add eSIM

    On the iPhone where you want this eSIM, choose Use QR Code.

  2. Scan the QR code above

    Hold the phone steady until iOS picks it up. Tap Continue when prompted.

  3. Wait for activation

    Activation may take a minute. Don't exit the screen — iOS will say Done when ready.

  4. Label your new eSIM

    Pick a name like "Yoho — Japan" so you can tell it apart later.

  5. Pick a default line

    Select Primary as your default line for calls, FaceTime, and iMessage.

  6. Use this eSIM for Cellular Data

    Choose your new eSIM under Cellular Data, then tap Done.

Step 3

Connect to the network

Once installed, finish these to start using data.

  1. Make sure the eSIM is on

    Settings → Cellular → your new eSIM → Turn On This Line.

  2. Select the eSIM for data

    Settings → Cellular → Cellular Data → choose your new eSIM.

  3. Pick for calls and texts

    Settings → Cellular → Default Voice Line → choose your new eSIM.

  4. Turn on Data Roaming

    Settings → Cellular → your new eSIM → enable Data Roaming.

Troubleshooting

Po namestitvi ni interneta?
  1. Preverite podatkovno gostovanje: Prepričajte se, da je podatkovno gostovanje omogočeno za linijo Yoho eSIM
  2. Preverite prednostno podatkovno linijo: Prepričajte se, da je Yoho eSIM nastavljena kot prednostna linija za mobilne podatke
  3. Ponovno zaženite telefon: Ponovni zagon po namestitvi odpravi večino težav s povezavo
  4. Ročno izberite operaterja: Če samodejna povezava ne uspe, poskusite ročno izbrati lokalnega operaterja

- iPhone: Nastavitve › Mobilno omrežje › linija Yoho › Izbira omrežja › izklopite "Samodejno" › izberite razpoložljivega operaterja

- Android: Nastavitve › Povezave › Mobilna omrežja › Operaterji omrežja › Izberite ročno

Skeniranje QR kode neprestano ne uspe?
  • Prepričajte se, da je slika QR kode jasna in popolna
  • Prilagodite razdaljo in kot, poskusite znova pri dobri osvetlitvi
  • Če še vedno ne uspe, preklopite na ročni vnos
  • Vsako QR kodo je mogoče namestiti samo enkrat – če ste jo že namestili, je ne skenirajte znova
Ali lahko eSIM premaknem na nov telefon?
  • Večine eSIM-ov ni mogoče prenesti med napravami. Če ste zamenjali telefon, se obrnite na podporo, da ponovno izda aktivacijsko kodo
  • Nekateri paketi podpirajo ponovno namestitev prek aplikacije Yoho Mobile

Already bought an eSIM?

Open your eSIM detail page for the real QR code and activation details.

Haven't bought yet?

Pick your destination and grab a plan in under a minute.