eSIM Installation Guide
Install in 3 minutes, auto-activate on arrival
Install early
Install over WiFi before you leave so you're not stuck without internet on arrival
Keep your physical SIM
The eSIM doesn't affect your physical SIM — keep it for calls and texts from home
Manage data usage
After arrival, turn OFF Data Roaming on your home SIM and use only the Yoho eSIM for data
When validity starts
Most plans start counting validity from the first connection to a local network
Starts in Settings → Cellular
- 01Settings → CellularOpen Settings, go to Cellular (or Mobile Data)
- 02Add eSIMTap "Add eSIM" or "Add Cellular Plan"
- 03Use QR CodeChoose "Use QR Code" and scan the QR code from Yoho Mobile
- 04Confirm and label it as "Yoho" or "Travel" so it's easy to spotKeep this eSIM line off for now — turn it on after you arrive at your destination
On Arrival: Activate
Enable the eSIM after you land and it'll connect automatically
Troubleshooting
- Check Data Roaming: Make sure Data Roaming is enabled for the Yoho eSIM line
- Check preferred data line: Make sure Yoho eSIM is set as the preferred line for Mobile Data
- Restart the phone: A restart after install resolves most connection issues
- Pick a carrier manually: If auto-connect fails, try selecting a local carrier manually
- iPhone: Settings › Cellular › Yoho line › Network Selection › turn off "Automatic" › pick an available carrier
- Android: Settings › Connections › Mobile networks › Network operators › Select manually
- Make sure the QR code image is clear and complete
- Adjust distance and angle, try again in good lighting
- If it keeps failing, switch to manual entry
- Each QR code can only be installed once — if you've already installed it, don't scan again
- Most eSIMs cannot be transferred across devices. If you switched phones, contact support to reissue the activation code
- Some plans support reinstalling via the Yoho Mobile app
Already bought?
Your QR code and activation details are in My eSIMs.